Strona 1 z 1

Witam serdecznie

: czwartek, 24 lis 2016, 20:55
autor: markwild2100
34 lata na karku a w głowie zabawki, dołączyłem do grupy żeby się trochę nauczyć o napędach rakietowych i bezpiecznie testować prototypy na poligonach.
Zawodowo buduję wielkie konstrukcje ze stali a hobbystycznie utylizuję co zarobię na wszystko co związane z bezzałogowcami.
Składam kit amerykańskiego LOC precision model norad, którym wystrzelę w ramach eksperymentu chiński klon APM żeby zobaczyć co się w nim popsuje od przeciążeń. Wstępnie wychodzi na to że poleci to na ok 400m (jeszcze masa nie znana) Silnik 137Ns Aerotech G80 7-T.
Czytam i gromadzę głównie anglojęzyczne źródła.
Pozdrawiam.

Re: Witam serdecznie

: czwartek, 24 lis 2016, 21:00
autor: Tofifi
Cześć!
Wow, to jakiś wysyp dzisiaj czy jak? Jesteś chyba 3 nowym użytkownikiem - ale to bardzo cieszy!
Co do literatury to jest także i po polsku na naszym forum w odpowiednich działach.

Re: Witam serdecznie

: czwartek, 24 lis 2016, 21:02
autor: markwild2100
Forum przeczytałem jako pierwsze. Zaraz po tym dołączyłem do PTR.

Re: Witam serdecznie

: czwartek, 24 lis 2016, 21:06
autor: Tofifi
Warto dopisać u siebie w profilu skąd podochodzisz - chociaż województwo łatwiej wtedy nawiązać kontakt z kimś od nas kto być może mieszka w okolicy.

Re: Witam serdecznie

: czwartek, 24 lis 2016, 21:09
autor: jaskiniowiec
Skąd dostęp do Aerotecha?

Re: Witam serdecznie

: czwartek, 24 lis 2016, 21:10
autor: markwild2100
Pochodzę z Dąbrowy Górniczej ale nigdy nie wiadomo gdzie się obudzę w przyszłym tygodniu, wszystko zależy jakie zlecenie dostanę, jeszcze się nie zdarzyło żeby było za daleko od kraju.

Re: Witam serdecznie

: czwartek, 24 lis 2016, 21:44
autor: markwild2100
Kupuję głównie u źródeł, głównie z Chin. Aerotechy można zamawiać we Włoszech do klasy G włącznie. http://www.sierrafoxhobbies.com/en/54-a ... single-use


Z ameryk nie wysyłają poza pewne stany a już za granicę wcale. Jak ktoś coś będzie potrzebował przetłumaczyć z włoskiego to służę pomocą, jeśli będą potrzebne silniki mocniejsze do klasy M włącznie to jedyny sposób jaki znalazłem to import do UK, trzeba wyrobić na Policji pozwolenie i już można tam sprowadzać, wywóz z UK może być problemem.




Thanks to efforts by SERFS and the BMFA, the UK CAA have recently deregulated model flying in the UK, including rocketry ! After long consultation the CAA agreed to scrap up to 50 pages of regulations as uninforcable !.the guidelines below are current for any model aircraft ( including rockets ) up to and including an all up weight of 7 Kg ! above this limit extra rules and regulations apply to all model flying and you should consult directly with either the BMFA or the CAA Details are available in CAA pamphlet CAP 658

The following are extracts from the guidelines published by the British Model Flying Association & the UK Civil Avaiation Authority.These are the current (Jan 97) regulations regarding the flying of model aircraft (Including rockets) anywhere in UK airspace:

Regulations from the UK CAA are contained in Chapter 1 of the UK Air Navigation Order (ANO) Apendix I Page 31 deals spefically with Model Rockets and states :

1. Only fly on sites that are clear and open with adequate open space downwind of the launch point and in good visibility.

2. Models should be constructed of lightweight materials and should contain no metal structural parts.

3.Only commertially available factory produced motors should be used.

4. Models should be equiped with a suitable recovery system (Parachute or streamer) or be equiped with aerodynamic surfaces sufficent to ensure a safe decent.

5. Motors should be ignited electrically in such a way that the opperator is at least 5 meters away from the launch point.

6. NOTE Article 55 of the ANO applies to ALL MODEL ROCKETS LAUNCHED WITHIN UK AIRSPACE :in that the opperator of a model rocket must ensure that his model does not endanger a real aircraft at any time.

Further details are available from :Civil Aviation Authority, 1st Floor, East Wing, Aviation House, South Area, Gatwick Airport, West Sussex, RH6 0YR.Tel 01293 573540
Thanks primarily to hard work by members of SERFS and other individuals throughout the UK you can now legally import Aerotech Single use and Reloadable Motors into the UK, upto and including "M" size motors.

HOW?
Like This:1. Go to your local Police Station and ask for form COER/1, an application to aquire and keep explosives. (Then watch their reaction and leave hurridly !)

2. Fill in the form(Just parts A, B, & D) and of course the common sence parts ,name etcQ9 = "reload of toy propellant to power model rockets"Where = As and when models will be flownQ14 = No quantity is required in this section as the amounts are set by law.You may however wish to put "Reloads are manufactured from Ammonium Perchlorate and are classed under UN0349 & UN0351, which are UK 4.1 &1.4 respectivly.Q17 ignore (Do not send anything to Merseyside as these licences have not existed for three years !

3. Send the completed form to the Chief Constable of your local Police force, marked for the attention of the Explosives Liason Officer (usually in the Firearms dept)No fee is payable for this licence, however the liason officer may wish to visit your home to inspect or specifiy secure storage.( Mine asked for a lockable steel box bolted to the floor of the garage)

4. You may wish to include a covering letter and the following information may assist the Police:Further information on classification can be obtained from :

Mr J.Phillips H & SE, Room 615, Rose Court, 2, Southwark Bridge, London, SE1 9HS

5. We are assured that we may store up to 7Kg of propellant under "Mode B" storage and that there is currently a Health & Safety exemption certificate from having an alarm system fitted to your home.



7. You may have to stress that these are NOT fireworks and you are not selling them to anyone else !

8. Once you have your certificate send a copy to the address in paragraph 4, in return you wil lrecieve an "Authority to Transport" (No Charge)this will then give you all the paperwork you require to "Legally" import Aerotech Single use and RMS motors into th UK.

9.For your information, motors can currently ONLY be sent surface mail.You will need to send a copy of your Authority to Transport to the port of arrival in the UKand arrange personal collection from the port.(carriers are both expensive and hard to find for explosives)You are also liable for import duty and VAT so bear this in mind when you order, plus this has to be paid to customs when the motors are collected.

10. And thats it ! should you require the details of the US supplier who shipped the first order contact :

http://www.europerocketry.com/index.php?id=309



Re: Witam serdecznie

: czwartek, 24 lis 2016, 23:17
autor: wrx
Witam serdzecznie.

Zaczyna Pan z przytupem.
Niejestem zwolennikiem takiej drogi, alę życzę powodzenia i wysokich lotów.

Re: Witam serdecznie

: piątek, 25 lis 2016, 08:13
autor: jaskiniowiec
Miki, silnik G to jeszcze nie za wielkie mecyje...